18 Jan

Significant Suggestions To Follow When Painting Interior Doors

Category:Home Maintenance

Painting the interior doors of your home might seem like easy work at first glance, but you should remember that the process is much more challenging than you can ever imagine. Without obtaining the correct equipment along with proper planning, you cannot prove to be a success at this task. That’s the reason why most homeowners out there proceed to opt for professional painters. 

However, if you want to go the DIY route and perform the painting job at your own pace, then we suggest following the below-mentioned recommendations. 

The List Of Equipment That You Will Require

You already might know that brushes and paints are the staples of every painting job, but there is also some more equipment that can make the end result worthwhile. It’s suggested that you also get the following:

  • Mini roller tray
  • Sandpaper
  • Drop cloth
  • Tack cloth
  • Wood filler
  • Rollers with roller handle
  • Paintbrush
  • Painter’s tape

The Preparation Job

It should be perceived that a great paint job will always rely on getting the preparation done in a well-thought-out manner. 

  • Proceed to remove all the doorknobs first because it’s quicker to paint without them than doing around them. 
  • You’ll need to decide whether you want to remove the doors for painting or paint them as they are. We suggest removing them and painting them.
  • Professional house painters in Auckland suggest that in case you decide to paint the doors without removing them, then ensure that you use the painter’s tape to cover the hinges. Cut the excess tape if necessary.
  • If you find any issues with your door (such as damage or dings), be sure to use the wood filler to smoothen the surface out. 
  • After that, use your sandpaper to sand the surface of your door lightly. 
  • Once done, proceed to dust the door with a cloth to make the surface ready for painting. 

Should You Use A Primer Before Painting?

If your door is already pre-primed, then there’s no need to add primer. However, if it’s not primed, then the addition of primer is necessary. 

The Painting Process

  • For Flat Doors

Start your process by painting the edges (where the hinges go) and then proceed to the header and sides. Ensure that you don’t overload the brush with paint. Once done, you can then paint the surface (both front & back). You can either use a roller or a brush. 

  • For Panelled Doors

Painting panelled doors also go in the same manner as you’ll need to paint the panels first and then move to the stiles (pieces between the panels). Lastly, you’ll need to paint the edges. 

After painting, wait for the first coat to dry and then proceed to apply the second coat. Once the second coat dries up, you can use the newly painted door again. 

Leave a Reply

Your email address will not be published. Required fields are marked *